|
|
|
| Q&A: Dr David Hartman on Head Injuries (824 Posts)
|
| Topic |
Comment |
|
PsychoLloyd's Lucky Break Slide Gloves. . .?
|
|
On 6/4/2002
Dr. Dave
wrote in from
(12.249.nnn.nnn)
Alan,
Good going! As Bob said earlier, the best innovations come from people in the sport. It's great you're taking up the challenge.
After you have a design and maybe a prototype, talk to an attorney about getting a patent. Seriously. Then maybe a local mfgr can whip up a bunch. I bet that some of distributors who advertise here would be interested.
And you'll need a catchy name for the product. Any ideas from readers of this list?
drD
|
|
|
|
|
specialty apparel
|
|
On 6/4/2002
psYch0Lloyd
wrote in from
(24.148.nnn.nnn)
Hey now Doc,
A little while ago you suggested that there could be a market for a slide glove/wrist guard combo. Let me say that I think that I've just come up with one. I've designed a glove w/the flexibility to be used with numerous types of gloves, then Kaylee asked me to see if it would work w/wristgards. Lo and behold, when I put it over the Harbingers that I wear, it worked! I've got a little bit more development time to put into this thing, it's been less than a week since conception, but I'm hoping to have it on the market within the month (fingers crossed).
Alan Sidlo
Knucklehead Racing Team
|
|
|
|
|
Dexter's Helmet Laboratory?
|
|
On 6/1/2002
Dr Dave
wrote in from
(12.249.nnn.nnn)
Bob & Leo,
I think that we should be lobbying the helmet people to create some of the new ideas Bob talks about, so we can have a new crop of safety tested helmets. I'm a little concerned about homebrew helmets though - I don't want to give up my day job to become a lab rat. I also don't think that the average person can whip these things up in their own basement crash test simulator. Materials which look like they're crashworthy may have unexpected behavior in combination with other materials or at speed or impact.
I like the idea of full face helmets for speedboarding, but not those, as Bob describes, with outrageous extensions that can twist your head around.
One more time: Let's compile a list of helmet-makers and start lobbying!
drD
|
|
|
|
|
Speedboarder Helmets
|
|
On 5/31/2002
Bob Swartz
wrote in from
(68.50.nnn.nnn)
I hope Dr Dave dont mind me jumping in here a little. I study all of the gravity sports safety gear and the accidents and injuries that occur in the effort to increase the competitivness while increasing the safety margin.
I have studied various off the shelf helmets and some of the elaborate and homemade modifications. Some of these helmets are real pioneering in helmet technology as realated to our downhill street sports. However I have seen a few scary inventions on the race course that have myself and others cring with concern. The large protectors, fairings or any protrustions (to include video cameras)coming out from the natural shape of the helmet can and will eventually act as a lever and at the minimum wrench your neck in a rolling crash. The further these things stickout from the fulcrum/pivot (your neck) the greater chance and greater force will be applied to breaking your neck.
May I suggest when experimenting with things like helmet fairing that you constuct it as a crushable or easily breaking away. Use something like a very very thin lexan (no sharp or pointy edges) and use it's shape for strength rather than the material. Attach it with just enough velcro or adhesive rubber NUBS tht it stay secure under normal duty but will pop off if it hits the road or anything at more than a 3 foot drop.
I love invention, it's the only way our gear will get better, but in this day and age of computer simulation and tons of smart people joining in these forums we dont need to become dead lab rats for something you may have forgot to look at.
Ride Fast Ride Safe
PS.... YEs that fairing helmet the Gravity Bike Guy had looks real cool and real dangerous
|
|
|
|
|
speedboard helmets
|
|
On 5/31/2002
Leo
wrote in from
(199.82.nnn.nnn)
Dr.D, what do u think of the speedboarding helmets and other helmets like motocross ones that have large protectors(i.e mouth protectors or fairings)
leo
|
|
|
|
|
Downside of your full face (Helmet)
|
|
On 5/30/2002
Dr. Dave
wrote in from
(12.249.nnn.nnn)
Full face motorcycle helmets are the best protection for high speed. Also look into BMX and Motocross helmets. Downside of some mc helmets is weight and cost but what's it worth to you to avoid 30 years of quadraparesis, motorized wheelchairs and thinking that Gilligan's Island is funny, not to mention testing out once and for all if there is an afterlife.
drD
|
|
|
|
|
Full Faced helmets w/shields
|
|
On 5/30/2002
The Bass Fiddler
wrote in from
(216.11.nnn.nnn)
Dear Doc Dave,
Would a full faced helmet such as the Bell Street Models be really good for downhill. I was thinking that the sheild would keep the wind from you face and eyes, a big problem for anything ove 25mph, at least for me. plus the helmets are made for motorcycle that hit over 100mph. are these style of helmets really good, or is there a down side
Thanks,
|
|
|
|
|
Gloves with wristguards
|
|
On 5/29/2002
Sparker
wrote in from
(194.176.nnn.nnn)
I'm currently using an old pair of Level "Superpipe" snowboarding gloves as slider gloves. These feature a kevlar and rubber reinforced palm and fingers.
As well as the reinforcement, these gloves feature a built in semi-flexible wristguard.
They offer good support without being totally rigid.
They work for me (if a bit hot and sweaty sometimes).
Cheers
Sparker
|
|
|
|
|
Kanufi's new business. . .
|
|
On 5/28/2002
Dr Dave
wrote in from
(12.249.nnn.nnn)
I'm not aware of any slide glove/wrist guard combo. I think it would be a fantastic product for boarders. Anyone into making specialty apparel?
drD
|
|
|
|
|
Wrist guards
|
|
On 5/28/2002 kanufi
wrote in from
(144.134.nnn.nnn)
Is there a wrist guard/slide glove combo.I have noticed that a slide glove will give you protection from wearing away your hand but impact forces like your talking about its useless.My main sliding wrist is 10mm thicker from falls of this nature.When it happened i saw a doc and he said there is damage there but he could do nothing .Now i put some high density foam behind the slide puck just to take out the jaring effect of falls.
|
|
|
|
|
No Risk Wrist (try repeating *that fast)
|
|
On 5/26/2002
Dave H.
wrote in from
(12.249.nnn.nnn)
Henry,
Wrist guards that have a plastic spring will absorb the landing of the most common fall - that of splaying out your arms in front of you. You land directly on the wrist bone without a guard and your wrist, which is composed of many tiny little bones that are not skateboard-approved, is toast. Yes, if you're good, you can Coleman slide or other maneuver, but for an unexpected fall, put your wrist on springs.
drD
|
|
|
|
|
wrist guards
|
|
On 5/26/2002
Henry J
wrote in from
(63.76.nnn.nnn)
Doc-
How do wrist guards prevent injury? I know that they basically absorb the shock from a fall, but in my quest for enlightenment I'd like to know more.
Thanks,
hj
|
|
|
|
|
The Helmet that keeps on giving - KMG's note
|
|
On 5/25/2002
Dr. Dave
wrote in from
(12.249.nnn.nnn)
KMG,
The shell of the helmet doesn't have to be soft also because impact slams your head against the *inside of the helmet. As you suggest, this crumples/crushes the foam and disipates the force of the impact. The shell is hard, so a random rock, girder, etc, doesn't impale your head on the way down and so the foam remains intact in its original shape to cradle your skull.
drD
|
|
|
|
|
my point
|
|
On 5/25/2002 P@io
wrote in from
(66.168.nnn.nnn)
a helmet is better than the body's natural padding.
there are many levels of helmets/padding.
every level has SOME benefit. even a ballcap can prevent chunks of scalp lost in a SLIDE situation, but for a WHACK, fergit it!
my invisible point was that everyone should wear the best helmet that they can(within reality...I won't wear a NASCAR fullface for slalom).
and yes, helmet manufacturers should do more than just produce "all sport" helmets. and several are getting more "sport specific", but there's still a way to go.
|
|
|
|
|
Go to the link
|
|
On 5/24/2002
Dr. Dave
wrote in from
(12.249.nnn.nnn)
The chart below didn't format properly, but the link http://www.bhsi.org/stdchart.htm should show the comparisons between standards. CPSC is a good standard, and almost as strict as Snell.
drD
|
|
|
|
|
Helmet standard comparison
|
|
On 5/24/2002
Dr. Dave
wrote in from
(12.249.nnn.nnn)
Don't know if this will come out but if it doesn't, go to the link: http://www.bhsi.org/stdchart.htm
CPSC ASTM Snell Snell ANSI 1984
F1447 B-90S B-95 (withdrawn)
Drop height on 2.0 m 2.0 m 2.0 m 2.2 m* 1.0 m
flat anvil 2.0 m
Drop height on 1.2 m 1.2 m 1.3 m 1.5 m* 1.0 m
hemispherical 1.3 m
anvil
Drop height on 1.2 m 1.2 m None 1.5 m* None
curbstone anvil 1.3 m
Headform weight 5 kg 5 kg 5 kg 5 kg 5 kg
for adult tests
Headform weight 5 kg 3.2 or 5 kg 5 kg 5 kg
for child tests 4.0 kg
(pending)
Total energy: 98 J 98 J 98 J 110 J* 49 J
adult test 100 J
medium headform
flat anvil
Failure
threshold 300 g 300 g 300 g 300 g 300g
Coverage vs. Same Less Same More Same
CPSC 1999
Strap jerk 24 J 24 J 24 J 24 J 24 J
(joules)
Rolloff test Yes Yes Yes Yes None
*Snell B-95 uses a more severe impact for initial certification than for
follow-up performance testing. Snell considers the B-95 strap jerk test
to be roughly equivalent to the B-90 test, although parameters have changed.
|
|
|
|
|
Jonathan's Head
|
|
On 5/24/2002
Dr. Dave
wrote in from
(12.249.nnn.nnn)
Jon,
Pre-frontal head injuries can disrupt attention and so-called "executive" processes -basically, how to direct all the other parts of the brain in an orderly, systematic manner. That often shows up as problems with attention and being overloaded trying to make sense of complex information.
The people to see for possible help on this would be anyone doing "cognitive rehabilitation" on an outpatient basis. This is basically a lot of systematic practice and learning of work-arounds for such difficulties. The adage "use it or lose it" applies. The more practice, the better.
The second source of information would be a neurologist who provides pharmacotherapy for enhancing cognitive function in brain injured patients. He or she would also likely be working at a rehabilitation center or the neurology wing of a university hospital. Best of luck. Write again and let us know what happens or if you have other questions.
drD
|
|
|
|
|
The Egg and I
|
|
On 5/24/2002
Dr. Dave
wrote in from
(12.249.nnn.nnn)
Wes,
A couple of limitations in your egg analogy: Dropping an egg surrounded by a thin shell and a large amount of egg white doesn't keep the yolk together. The "vitelline membrane" does. It's a sac that covers the yolk and keeps it from leaking.
Also the analogy doesn't really hold, because the brain is composed of trillions of synapses that can be broken or disrupted by the kinetic energy of the fall. Even if the brain looks OK on observation, the outer shape is an inaccurate guide to the amount of damage caused by the fall.
But let's say you wanted a helmet like an egg. You'd have to have a think shell surrounding a very large amount of viscous gel, giving you a look a little like the gremlin in old Bugs Bunny cartoons. It would be pretty heavy and would make current helmets look really good by comparison.
It's an interesting idea though. . . drD
|
|
|
|
|
Hey Patio
|
|
On 5/24/2002
Wesley Tucker
wrote in from
(64.12.nnn.nnn)
And your point is?
Have I at anytime advocated riding without a helmet? Or even suggested anyone should consider riding without a helmet? Of course not. Your "thought experiment" proves beyond a shadow of a doubt that an argument between your skull and concrete will always have a pre-determined outcome.
Does that mean, though, that helmet design, versatility, materials, construction and fit should come to a standstill? Have we learned all there is to learn about head protection and we should stop looking into new ways? Is foam rubber then end-all in padding? Is Kevlar the final word in shell materials?
I don't think so. What I do believe is that helmet design (or any safety equipment for that matter,) is a lot like skateboard racing: the sooner you realize we have our own needs and requirements, the sooner manufacturers will stop making motorcycle helmets for us to wear. I don't play hockey, I don't do BMX, I don't whitewater, I don't even ride a skateboard on a plywood ramp. I ride a skateboard on concrete and asphalt as fast as I can. I want a SKATE RACING helmet. I see nothing insensitive about proposing that we as skaters demand the best product for OUR sport.
I now yield the soap box to the next loud mouth who wants to let out a good rant!
|
|
|
|
|
hey wes...
|
|
On 5/24/2002 Patio...
wrote in from
(63.65.nnn.nnn)
for a real experiment, stand flat footed on a sidewalk, driveway, whatever.
fall backwards with your arms folded in front of you.
at this low altitude, and zero speed, you'll hear a nice whack as your head hits.
do you trust your "natural padding" to protect you? I hope not.
I hit my head in a similar manner(board shot out from under me, taking my feet with it, and the back of my head went WHACK. luckily, I only damaged my cerebellum, and was in a wheelchair and then had to re-learn walking and everything.
this is the same injury that you see hockey players get all the time, their feet go out from under them and they whack the back of their heads.
some of them aren't lucky enough to re-learn anything.
The old Tour de France riders would use those "leather strap" helmets. those would let you skid on the leather rather than your scalp, and incase of a good impact, it kepe your head parts in the same general area until they came with a mop and bucket to get you.
Those nutty Harley helmets are the same...skid lids to slide on, but no real padding for impact.
oh wait, you don't have helmet laws in south carolina anyways...It scares me when some dude blows by on his hog at 80mph with no helmet, but the "innocent" helmetless wife/girlfriend on back is who I feel REALLY sorry for.
a skateboard helmet is as comfy as a baseball cap.
wheelchairs suck.
re-learning to walk sucks.
it's better to have one and never have it touch the ground, than to be riding in a chair thinking you shoulda' had one...
off my soapbox and back to slalom practice.
bottom line is that "I LOVE Y'ALL, MAN!", and I want to skate with you untill we are REALLY old.
p
|
|
|
|
|
VANS helmet or CPCS certified Helmets
|
|
On 5/24/2002
Leo
wrote in from
(216.72.nnn.nnn)
Dr dave, have u seen tis helmet?
are the cpsc certified helmets good for anything besides puting it upside down and plant a flower?
oppinions wanted
leo
|
|
|
|
|
replacing helmet
|
|
On 5/24/2002
Paul K
wrote in from
(195.110.nnn.nnn)
With any helmet constructed with a foam core, its 1 hit & replace it, as the foam has already compressed, leaving further Shock dampening qualities as zero.
|
|
|
|
|
replacing skate helmets
|
|
On 5/24/2002 66.
wrote in from
(66.190.nnn.nnn)
dr. dave,
at what point should you replace a skate helmet?
would a glancing blow be enough?
i took a pretty hard slam (momentary blurred vision) on the vert ramp at the xgames skatepark in atlanta. the helmet obviously saved me, but showed absolutely no signs of damage.
66.
|
|
|
|
|
Reading
|
|
On 5/24/2002 Jonathan
wrote in from
(212.126.nnn.nnn)
Dr. Dave - I recieved a head injury some years ago - doctors at the time diagnosed a tiny amount of frontal lobe damage...
Im fully functioning in most departments, but have difficulty concerntrating enough to read a book. Pre injury I could read a book a day (!) post injury I'm struggling to read a page... Is it attention span stuff? No problems with reading short articles in magazines and so forth, but large scale just eludes me.
|
|
|
|
|
off topic
|
|
On 5/23/2002
Kaylee
wrote in from
(68.35.nnn.nnn)
Sitting at home and watching TV is not good for your head either.
|
|
|
|
|
