Pre-1980 Vintage Skateboard Gear

Posts 251-275 of 6027

Pre-1980 Vintage Gear (6027 Posts) Product Info Toft On 6/13/2000 Kanoa wrote in from (38.29.nnn.nnn) I know someone that owns one but thoses that do, will most likely never sell them. However Jonas, a NCDSA member makes them and I as well as others are waiting desperatly for some pics, it was posted under homemade brds. Could you imagine the faces on the new schooler as you tear up the park on one of those!     Rate post 13583 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Lonnie Toft On 6/13/2000 Simon "Old Brit" wrote in from (195.92.nnn.nnn) Guys, I'm from the jolly old UK. I have in my posession a beautiful Sims Brad Bowman Decks, with Indies and Alva conicals. I used to use it regularly, until I managed to ride into the back of my ankle and Severe my achilles tendon. Thats been fixed and to prevent it from happening again I'm getting into longboarding for the second time. Does anyone have a Sim's Lonnie Toft deck preferably the 33" model that they would be willing to sell ?? T.T.F.N........Simon.     Rate post 13560 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Turners On 6/12/2000 Herbn wrote in from (207.198.nnn.nnn) 34-44 inches,wider versions of the same type of shapes,and you would definitely have at least an E-marketable skateboard,I'd buy one,even a few for my shop,if reasonable whole sale was possible.     Rate post 13502 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Turner On 6/11/2000 Pre-School Rider wrote in from (209.198.nnn.nnn) Ali,you oughta see the one I have.It came to me in this UGLY school-bus interior greenish color,SO,I took it to my friend Georgi,a former Kostabi artist.He hand airbrushed a Spaceship onto the top.It's not finished some seven years later,'cause I had to ride it before Georgi got to the bottom.Scroll back to early Feb.this year(search either Turner or snowboard cross trainer)and you'll see three friends of mine with newer Turners.Somehow,one of these days,I'm going to get this board back into production,IF I can get the funding and Bobby Turner's blessing,but that's another matter altogether.They ride better than they look!:0     Rate post 13490 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Turner On 6/11/2000 Ali wrote in from (212.48.nnn.nnn) I never knew a skateboard could be THAT beautiful.     Rate post 13473 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) old, old, stuff On 6/10/2000 hugh r wrote in from (205.216.nnn.nnn) Chicago Trucks and Cadillac wheels... any one have an old set they would be willing to part with? HR     Rate post 13449 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Bahne trucks On 6/9/2000 Herbn wrote in from (207.198.nnn.nnn) I think these had only three holes,but they were punched out of steel sheet and round stock with welds and allen bolt axles so I don't see how Bennetts wound remind you of them.     Rate post 13374 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Old three holers On 6/8/2000 Pre-School Rider wrote in from (209.198.nnn.nnn) I remember only two trucks that came with just three holes;Chicago,and an odd one,Santana,that had square bottom bushings.Both Clamper and Force had Bennet-like baseplates,but also with 8 oviod holes.Sorry Lonecore,that's all I can come up with.The old memory seems to be a little off today.     Rate post 13362 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) trucks with 3 holes On 6/8/2000 Lonecore wrote in from (194.230.nnn.nnn) Those Bennet trucks really remind me of some trucks I found in a friends garage lately. They have the same kingpin, with the nut underneath. They are a little bit narrower and have only 3 holes on the baseplate. Can somebody tell me what trucks they are? I'll post a photo, but it'll take a while. Greetings, Ueli     Rate post 13353 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) 1970's Bennett Trucks On 6/7/2000 Adam wrote in from (63.192.nnn.nnn)     Rate post 13336 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) old wheels for DT On 6/7/2000 hugh r wrote in from (205.216.nnn.nnn) Hey DT, check to mail, wheels should arrive real soon. If they are not what you had hoped for let me know. If they are (and I think you will be happy) let me know that too. Please erase this post after you have read it... have fun... HR     Rate post 13287 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) '70 60mm 97a Cherry Kryptonics On 6/3/2000 Mike wrote in from (152.163.nnn.nnn) I think I have found the best all around wheels. These Cherry Kryptos are by far better than anything i have tryed before. My uncle, who used to ride back in the day (and still does today), had these babies on one of his old home made boards. He let me try them one my board and all I have to say is if anyone can find them, buy them before anyone else can, cuz they're the shit.     Rate post 13169 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Early Star-Trac Kryptonics On 6/3/2000 Laurence Downer wrote in from (212.139.nnn.nnn) For over three years I have been serching for an unused set of 70mm bottle green Kryptonics - the ones marked 'KRYPTONICS WHEELS'in raised letters. Does anyone have a set to sell or know where I might find some ?     Rate post 13161 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) 1970's Turner Summer Ski On 6/3/2000 Adam wrote in from (63.192.nnn.nnn) Available on www.ebay.com     Rate post 13157 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Gull Wing Split Axles On 6/2/2000 Pre-School Rider wrote in from (209.198.nnn.nnn) Have you seen what these are going for on E-Bay??OY!!And to think I sold mine(Twenty years ago)for $40,inclusive with a G+S Rockit and Old non-cored Blue,70mm/84A Kryptonics!     Rate post 13142 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) 1970s Gullwing SplitAxle Trucks On 5/29/2000 Adam wrote in from (63.192.nnn.nnn)     Rate post 12988 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) toft On 5/29/2000 hugh r wrote in from (205.216.nnn.nnn) Hey Glen, The 8-wheelers were almost exactly the same as the 4 wheel simms/toft. They had a good size kicktail and the body of the deck is rockered about 0.5 inches... Hope that helps, HR     Rate post 12987 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) 8 wheelers On 5/29/2000 Glen wrote in from (216.102.nnn.nnn) Hugh, did the Lonnie Toft model eight wheeler have anyconcave to it. or was it flat with a kicktail? I made an 8 wheeler in the 70's that I used to have a lot of fun with. It was just a flat hunk of plywood, with bennett trucks, Park Rider Logan 5's on the back and Road Rider #4's on the front. I would like to make or buy one again for riding on the local school banks.     Rate post 12985 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Virtual Vintage Museum On 5/29/2000 Adam wrote in from (63.192.nnn.nnn) Kanoa, That was my original hope when we founded this forum, but we have not yet implemented the web server feature to let people post pics in real-time. The pics you see me posting I nab from ebay.com and post here manually. But anyone who want to see their pre-1980 vintage pics on this forum can email them to me and I'll post them.     Rate post 12968 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) toft 8-wheeler On 5/29/2000 hugh r wrote in from (205.216.nnn.nnn) Hey Kanoa, That is a great picture! I have added it to the 8-wheeler page... also I have added a nice example of a 1970's style vertical laminate board with a blocked kicktail that was made by Glen (on the viewers board page) hit my url off of the NCDSA links page... HR     Rate post 12952 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Toft On 5/28/2000 Kanoa wrote in from (38.29.nnn.nnn) Hey Hugh, check out your mail I just sent you a toft pic for all to see on you site. Keepin the vibe, Kanoa     Rate post 12946 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) virtual Vintage Museum On 5/28/2000 Kanoa wrote in from (38.29.nnn.nnn) Hey Adam, all of us should put together a virtual vintage museum by sending in pics of old boards we have so everyone can view them. I've tried to post picks in the archives before but couldn't figure out how to do it.     Rate post 12930 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Re:Tracker Info. On 5/26/2000 Dan wrote in from (168.191.nnn.nnn) Tracker never made plastic Half-Track hangers,just Mid-Tracks.And only plastic Base plates in Gnarly size pivots.Stimulators were inner grommets that were fat in the middle.     Rate post 12885 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) Banzai On 5/26/2000 Herbn wrote in from (207.198.nnn.nnn) Hey, thats my board!Actually mine was polished red,and the tail was worn to about half that length,and sharp to,skateboard/meatclever.     Rate post 12878 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0) 1970's Banzai On 5/25/2000 Adam wrote in from (63.192.nnn.nnn)     Rate post 12864 ! Best-Of Ncdsa (0)   Informative (0)   Abuse(0)   Flag Moderators (0)

Posts 251-275 of 6027