|
|
|
| Buttboarding (778 Posts)
|
| Topic |
Buttboarding Info |
|
|
|
On 2/26/2002 Duane
wrote in from
(68.15.nnn.nnn)
No spinning axles: a stupid rule. With the lack of 12" wide trucks out there that are stable, the top competitors will just get their Randal luge trucks modified, net effect zero. The luge trucks are worth running for the width and good 8mm axle. A low-cost option which should be allowed, but is it ? would be to modify low-cost trucks (RII 180), maybe 35 degree base in the rear, with luge axles and spaced wider. Lighter too. Are franken-trucks like this allowed ???
|
|
|
|
|
|
|
On 2/26/2002
Tommy
wrote in from
(212.185.nnn.nnn)
Dave, I've used the Indy 215 and Invader Trucks for a few years, never had any problems... I thought it is not really neccessary to switch to the R II's. Finally I tried it and after a while I recognised a few advantages concerning stability at higher speeds and especially better handling in hairpins because it's posslible to loosen the setup a lot more without having disadvantages at higher speeds. I've tried to flip the hanger because I've read it a few times in various message boards, but for me it did not have the expected effect... I've changed it back. May it works for others. Ok, hello to all others out there. cheers Tommy
|
|
|
|
|
|
|
On 2/26/2002 hc
wrote in from
(65.184.nnn.nnn)
hey chris, i like your 'lugeboard' proposal you made on the other forum. One thing though, i think the 12" width is just way too narrow, should be upped to 14".
I am skinny guy, and on my hakka concave, i sit on my thumbs all the time..
|
|
|
|
|
|
|
On 2/25/2002
Chris Chaput
wrote in from
(63.168.nnn.nnn)
The 2002 IGSA Rules from http://www.gravity-sports.com
The notable changes are that trucks with floating axles have to have the axles prevented from turning and that there is an underside "clearance" rule rather than having rules that state which methods of truck mounting would be acceptable or not (drop-throughs were formerly banned).
CLASSIC BOARD SPECIFICATIONS (Buttboard)
The BASIC PREMISE is that any rider should be able to put together a competitive board from skateboard shop supplies for about $200 complete. A rider may spend more on a board if they wish, however, advancements, which require a higher investment to be competitive, will be banned.
A. DECK: Must be made of wood. The deck may have molded features such as a kick tail, but must be one piece. It may be any shape within the size limits. Nothing may be added to the deck except for the following:
1. Foam padding to the top.
2. Non-aerodynamic stiffeners to the bottom.
3. Skateboard-type grip rails underneath.
B. WEIGHT: The complete board must not exceed five kilograms (5Kg / 11lbs). This rule will be strictly enforced. A 1kg allowance will be given for variances in the accuracy of scales.
C. LENGTH: One hundred twenty-five centimeters (125cm / 48”) maximum.
D. WIDTH: Three hundred five millimeters (305mm / 12”) maximum.
E. TRUCKS: The trucks must be lean steer activated. They must be commercially available* skateboard trucks. Rolling axles are prohibited. Trucks with rolling axles that are modified to eliminate the axle from rolling will be allowed. They must not exceed three hundred five millimeters (305mm / 12”) wide, as measured from the outside edge of the axles. The board must use exactly two (2) trucks.
F. BEARINGS: Standard steel 608 skateboard bearings only. No ceramic, Mini-mizers, 9 balls or other high performance or exotic bearing types.
G. WHEELS: 70mm maximum skateboard wheels only. They must be commercially available*. The board must use exactly four (4) wheels.
H. RIDE HEIGHT: A minimum ride height of 8 cm (3 1/8”) is required. This is the lowest part of the board from the ground and includes rails, stiffeners, bolts, nuts, etc. It does not include the trucks or the truck mounting hardware.
*Commercially available means the product must have been distributed to at least 24
people outside the company.
|
|
|
|
|
|
|
On 2/25/2002 Daniel
wrote in from
(4.23.nnn.nnn)
Thanks hc,buttboarding.com helped alot.Great site!
|
|
|
|
|
|
|
On 2/25/2002 hc
wrote in from
(65.184.nnn.nnn)
http://www.geocities.com/sk8sanjose/buttspecs.jpg
(by chris chaput)
|
|
|
|
|
|
|
On 2/25/2002 hc
wrote in from
(65.184.nnn.nnn)
see buttboarding.com (faq)
see geocities.com/sk8sanjose (equiptment)
chaput just post a good pic not too long ago.
|
|
|
|
|
|
|
On 2/25/2002 Daniel
wrote in from
(4.23.nnn.nnn)
Are there any rule in buttboarding about materials,wheelbase,etc.?Can I use a metal frame?
Can anyone help?Thanks
|
|
|
|
|
|
|
On 2/20/2002 Duane
wrote in from
(68.15.nnn.nnn)
I ride a Indy 215 in the front and a Randal spin axle, flipped, with 28 degree base in the rear on my mini-speedboard. Very low (about 3 3/4"" to grip tape with 83mm wheels). Turns very, very well with stimulator and hardcore bushings. The same set-up would work well for a buttboard, I think. I, too, have eyed the 219mm Tracker, especially cut down a little with a 205mm wide replacement axle. The tempting match here would be a Randal luge truck in the back, 12" total front and back track.
|
|
|
|
|
|
|
On 2/20/2002 hc
wrote in from
(65.184.nnn.nnn)
hmmm, I am eyeing the tracker dart with 219mm on solidskate.com.
|
|
|
|
|
|
|
On 2/19/2002 hc
wrote in from
(65.184.nnn.nnn)
ryan, see this
http://www.hugh308.homestead.com/tutor_longboard.html
also, mario takes two .25" ply, glue them together using a jig to get the concave.
regular maple decks, are glued together plys pressed in a mold.
Dave, I only tried RII flipped, (from what i have heard its a popular setup), would like to see how the indys ride, they would give a lower ride height.
|
|
|
|
|
|
|
On 2/19/2002
Dave
wrote in from
(152.163.nnn.nnn)
Hey i have a buttboard wit indy 215's and a longboard with R-II's. I was wondering if it makes a huge difference between the two trucks. I have been up to about 50mph with the indy's on my buttboard and it doesnt seem to be a huge problem but most people think i should flip the hanger on my R-II and ride with that. Any input would be apreciated. thanks.
|
|
|
|
|
|
|
On 2/19/2002 ryan
wrote in from
(132.235.nnn.nnn)
How do you make the wood concave and i do this with a regular plank of wood???? or is it specialy developd that way.
|
|
|
|
|
|
|
On 2/17/2002 hc
wrote in from
(65.184.nnn.nnn)
see (posting guidelines)
|
|
|
|
|
|
|
On 2/17/2002
dave D
wrote in from
(213.122.nnn.nnn)
how do you manage to post pics on here?
|
|
|
|
|
|
|
On 2/14/2002
Chris Chaput
wrote in from
(63.168.nnn.nnn)
In all honesty, the Fork Dog was meant to be different looking above all else. If it functions well, that's a bonus!
|
|
|
|
|
|
|
On 2/14/2002 Mario
wrote in from
(148.87.nnn.nnn)
As I look over the "Fork Dog", it appears that it is a very functional shape. The "ears" at the front provide maximum length to support your legs, while the little "shoulders" provide a good place to put your hands. I don't know what's up with the tail, though. Is that little flair there to give you more leverage at the back end? Does it still allow your shoulder blades to sit low enough on a tuck?
|
|
|
|
|
|
|
On 2/14/2002
Mario
wrote in from
(148.87.nnn.nnn)
I took apart my jig because the next board will be different: deep concave in the middle, flattening out towards the ends. This will effectively rocker the board. I'll take a picture of that jig when I make it (after my neighbor repairs his bandsaw).
|
|
|
|
|
|
|
On 2/13/2002 hc
wrote in from
(65.184.nnn.nnn)
yeah, that garage is awesome, way cheaper than vans, too.
mario, can you post a pic of you bending jig? would be cool to see.
|
|
|
|
|
|
|
On 2/13/2002
Wanna race?
wrote in from
(64.165.nnn.nnn)
So, how often have you loaded up the car for a session at the parking garage (HC, Mark Johnson, Mario, Mathew, Miko)…
Gotten busted after 3 or 4 runs…
Hung out skating another hour on just one level until getting busted again…
Try to leave and find your battery dead…
Then have to ask the garage security guy that busted you for a friendly JUMP?
I can confidently say it’s happened to HC at least once…
|
|
|
|
|
|
|
On 2/12/2002
Chris Chaput
wrote in from
(63.168.nnn.nnn)
Oh yeah, on the subject of interesting shapes, Darren had his "Spoon Cat", so I came out with this "Fork Dog".
|
|
|
|
|
|
|
On 2/12/2002
Chris Chaput
wrote in from
(63.168.nnn.nnn)
On the subject of "signature" buttboards, I took my old Chapstik board from the seventies, put it on my scanner, edited the image to make it 48" x 12" and made a template from it.
The result is a Chap-butt board.
|
|
|
|
|
|
|
On 2/12/2002
Chris Chaput
wrote in from
(63.168.nnn.nnn)
It seemed like Mario's image was a bitmap renamed as a jpg. It couldn't see it so i thought I'd try this...
|
|
|
|
|
|
|
On 2/12/2002 Mario
wrote in from
(148.87.nnn.nnn)
Trying again, this is my first and second board I made. First one is flat 5-ply birch, second one is homemade 12 ply birch.
|
|
|
|
|
|
|
On 2/12/2002
Mario
wrote in from
(63.208.nnn.nnn)
How do I post a picture? I thought I did it a little while ago, and now the entire post seems to have been removed.
|
|
|
|
|
